Making Noise · Bengaluru
Washing Machine Making Noise — Repair in Bangalore
Unusual banging, grinding or excessive vibration during a wash cycle is almost always mechanical — worn bearings, an unbalanced load, or unlevel feet. We diagnose the exact source and repair it so your machine runs quietly again.
Common Causes of Noise & Vibration
- Worn drum bearings (grinding/rumbling sound)
- Unbalanced load or overloading
- Machine not level on the floor
- Loose drum spider or counterweight
- Foreign objects caught between drum and tub
Our Diagnosis & Repair Process
Noise complaints are the hardest to diagnose over the phone, so we ask you to run a short cycle when we arrive and listen to it ourselves. A grinding sound during spin usually points to worn bearings, a banging sound usually points to an unbalanced load — the fix depends entirely on which one it is.
Our Process
How We Fix It
Sound & cycle test
Running a cycle to identify exactly when and where the noise occurs.
Levelling check
Checking the machine’s feet and floor levelling, a very common vibration cause.
Bearing & drum inspection
Checking for worn bearings or a loose drum assembly if levelling isn’t the cause.
Repair & re-test
Replacing worn parts and re-running a full cycle to confirm the noise is gone.
FAQs
Frequently Asked Questions
Grinding or banging noises usually mean a mechanical fault that will worsen, so it’s best to get it checked before it causes further damage.
Worth trying first — but if the noise continues after levelling, it’s likely a bearing or drum issue that needs a technician.
Typically completed within the same visit, though it’s a more involved repair than most other washing machine issues.