Not Draining · Bengaluru
Washing Machine Not Draining — Repair in Bangalore
If water is left standing in the drum after a cycle, the drain pump, filter or drain hose is usually blocked or faulty. We clear blockages and repair or replace pumps on the spot.
Common Reasons Water Won’t Drain
- Blocked drain filter (lint, coins, buttons)
- Kinked or blocked drain hose
- Faulty or jammed drain pump
- Blocked or faulty drain valve
- Clogged inlet/outlet from hard water scaling
Our Diagnosis & Repair Process
A blocked filter or a kinked hose accounts for most of the drainage calls we get, and it's usually a five-minute check. If that's not it, we move on to the drain pump itself — a bigger job, but still something we can normally finish in one visit.
Our Process
How We Fix It
Filter check
Clearing the drain filter, which is the cause in a large share of cases.
Hose inspection
Checking the drain hose route for kinks or blockages.
Pump testing
Testing the drain pump motor and impeller if the filter and hose are clear.
Clear or replace
Clearing blockages or replacing the pump, then confirming full drainage.
FAQs
Frequently Asked Questions
A small amount can be normal on some models, but standing water usually means a blocked filter, hose or a failing drain pump.
Roughly every 1–2 months with regular use, to prevent blockages and bad odour.
Yes — prolonged blockages can strain and eventually burn out the drain pump motor.